Polyvinyl Alcohol Application

Polyvinyl Alcohol products have a wide range of uses. In the textile industry, they are mainly used as yarn pulp, fabric finishing...

More information

Polyvinyl Alcohol Grades

Polyvinyl Alcohol is manufactured by polymerization of vinyl acetate monomer, followed by hydrolysis of the polyvinyl acetate. HOP...

More information

Polyvinyl Alcohol Introduction

Polyvinyl Alcohol is a water soluble and biodegradable synthetic polymer. It is adry solid, and is available in granule and powder...

More information
water soluble pva from china

●Good film forming property, without cracking

●Anti-adhesive release effect, even when thinly applied

●Impermeability of PVA film to the organic material used, e.g. styrene

Add 25 ml of N/10 NaOH solution, seal the flask and leave it still for at least 2 hours in room temperature.Add

accurately 25 ml of N/10 H2SO4 solution and titrate back the excess amount of H2SO4 solution present with

N/10 NaOH solution using phenolphthalein as the indicator, until the solution appears in pale pink color.

The volume of N/10 NaOH solution consumed in this titration is a ml. Carry out a blank test separately; the

volume of N/10 NaOH solution consumed in this blank test is b ml.

After swelling, dissolve it completely in a boiling water bath and leave it cool to room temperature. Measure

the viscosity of each solution at 20±0.1°C by Brookfield Viscometer with UL Adapter.Then, measure accurately

the concentration of each solution (Note 1). Report the viscosity (Cps) of 4.00 wt% solution as estimated from

a curve based on the relationship between concentration and viscosity, as follows:

Contact Us